Diamond Wire Saws for Marble
Our diamond wire saws are optimized for cutting various types of marble stones with or without water spraying. These wires provide a precise and efficient solution for both block squaring and slab production.
1. Dry Diamond Wire (Without Water Spraying)
Ideal for cold locations or quarries where water supply is inconvenient, our dry diamond wire offers long life and high cutting speeds. It is designed for use in marble quarries where water spraying is a challenge.
Specifications:
| Life Time | Cutting Speed | Beads/m | Assembling | Beads Diamter |
| 60-160 m2/m | 10-18 m2/h | 27/30/33 | Spring fitting | 10.5 mm. |
| 11 mm. | ||||
| 11.5 mm |
| SAMPLE STONES | APPLICATION | TYPE OF BEADS |
| Travertine, Onyx ETC | Dry diamond Wire for cutting All types of Marble. | M10 |
| Cream Marble | Hard Marbles |
Aria Diamond Tools
Order this product
2. Wet Diamond Wire (With Water Spraying)
Our wet diamond wire saws are designed for use with water, providing high-speed cutting while minimizing bead wear. It is ideal for medium to soft marbles.
Specifications:
| SAMPLE STONES | APPLICATION | TYPE OF BEADS |
| Salsali Marble (Middle East) | Hard and Medium Hardness Marbles | M12 |
| CRYSTAL Travertine (Turkey) Onyx (Mexico) Cream Marble (Italy) | Medium and soft Marbles | M14 |
| Life Time | Cutting Speed | Beads/m | Assembling | Beads Diamter |
| 60-160 m2/m | 10- 25 m2/h | 27/30/33 | Spring fitting/ Spring +plastic Injected | 10.5 mm. |
| 11 mm. | ||||
| 11.5 mm |
Aria Diamond Tools
Order This Product
Aria Diamond Tools